10
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
TREADMILL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
11
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE YOU
BEGIN
TREADMILL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP 3
FLAT WASHER (B)
CONSOLE MAST
CONSOLE CABLE
SPRING WASHER (H)
BOLT (G)
CONSOLE
DO NOT ATTACH
THIS SIDE UNTIL STEP 3-D
FLAT WASHER (D)
CONSOLE MAST
CONSOLE CABLES
SPRING WASHER (G)
BOLT (H)
CONSOLE
DO NOT ATTACH
THIS SIDE UNTIL STEP 3-D
FLAT WASHER (B)
20 mm
Qty: 4
SPRING WASHER (H)
15 mm
Qty: 4
BOLT (G)
20 mm
Qty: 4
HARDWARE BAG 3 CONTENTS :
A
Open
HARDWARE BAG 3
.
B
With running deck in lowered position, place
CONSOLE
on upright masts. Align the brackets
that are underneath the console with the top holes of the upright masts.
C
To assemble the
CONSOLE
to the
LEFT CONSOLE MAST
, insert 1
BOLT (G),
1
SPRING WASHER (H)
and 1
FLAT WASHER (B)
into the 2 holes in the
LEFT CONSOLE MAST
and lightly tighten.
D
Gently lift
RIGHT
side of the
CONSOLE
to connect the
CONSOLE CABLE
. Carefully tuck wire
in mast to avoid damage.
NOTE:
Do not pinch console cable or grip pulse wires.
E
Repeat
STEP C
above to assemble the
RIGHT CONSOLE MAST
to the
CONSOLE
.
F Leave console bolts loose until after STEP 4 is completed.
ASSEMBLY
STEP 4
BOLT (I)
CONSOLE MAST
BOLT (G)
CONSOLE MAST
CROSS BAR
SUPPORT BAR
BOLT (I)
15 mm
Qty: 4
HARDWARE BAG 4 CONTENTS :
O
A
pen
HARDWARE BAG 4
.
A
B
lign
SUPPORT BAR
with holes in
CONSOLE MASTS
.
I
C
nsert
BOLTS (I)
into all 4 holes of the
SUPPORT BAR
.
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
T
D
ighten all console bolts (Step 3) and support bar bolts (Step 4) completely.
CT81_Treadmill_Rev.1.8.indd 10-11
5/29/07 8:51:33 AM