LET’S GET STARTED
PARTS AND PIECES -
WHEEL W/ HUB MOTOR,
MOUNTING HARDWARE and MOTOR CABLE
TIRE and TUBE
BATTERY and BATTERY DOCK,
MOUNTING HARDWARE,
CHARGER
KEYS (2)
VARIABLE SPEED THROTTLE WITH CABLE
PEDAL ASSIST SENSOR (PAS)
2-PIECE MAGNET WHEEL and ALUMINUM LOCK RING
INSTALLING THE BATTERY:
The BATTERY is designed to be mounted to your bike using the water bottle mounts on your bike's frame
NOTE: On the frame is the recommended and generally considered ideal placement.
If your bike does not have a place to mount on the frame then a front or rear bike rack can work.
CAUTION: The BATTERY DOCK must be firmly attached. Make sure to tighten the dock bolts periodically.
Any damage to the battery due to insufficient mounting will not be covered under warranty.
STEP 1:
Install the
BATTERY DOCK
on the frame or carrier and use the
provided hardware
to install.
NOTE: Make sure the base of the BATTERY DOCK with the cables points down towards the bottom bracket / pedals.
STEP 2:
Insert the BATTERY on to the
BATTERY DOCK
once it is installed and secured.
CAUTION: You must use the key to lock the battery in place to secure it.
STEP 3:
Confirm that the BATTERY is locked and secure before riding.
STEP 4:
To remove the BATTERY from the
BATTERY DOCK
.
A: Insert Key and turn counter-clockwise.
B: Once unlocked simply pull the BATTERY out of the
BATTERY DOCK
.
USE KEY TO LOCK
THE BATTERY IN
PLACE TO SECURE
CAUTION: Avoid losing your KEYS. They are hard for us to replace.
RECOMMENDED TOOLS -
ALLEN KEY SET
TYPICALLY 4mm ALLEN FOR THE
WATER BOTTLE SCREWS
3mm FOR THE THROTTLE BODY
5mm FOR THE TORQUE ARM
19mm BOX OR ADJUSTABLE WRENCH FOR THE MOTOR AXLE
10mm OR ADJUSTABLE WRENCH FOR THE TORQUE ARM
8mm OR (PREFERABLY) PHILLIPS HEAD(+) FOR THE TORQUE ARM
SCISSORS FOR UNBOXING AND ZIP TIES