Horizon Fitness DSX 40 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 72

Horizon Fitness DSX 40 Скачать руководство пользователя страница 41

|

41

6.3.6 - Pressure Monitoring

When the fan is in operation, a high volume of air flows under the metering units, to the distribution

heads then on to the D-cups. At the same time, air is directed through the metering units (front and

rear only) and out inside the tank. This creates equal air pressure above and below the metering

units, therefore product can easily flow out of the rotors.

If there was a loss of pressure in the tank (lid left open/ incorrectly adjusted lid), the pressure

differential above and below the metering units will not be equal. As a result, product will not easily

flow out of the rotors.

An air pressure gauge is mounted to the front of the machine to monitor air pressure.
Normal operation the gauge should read 0 – 5 mbar.
If the air differential exceeds this value, please check the system for leaks as shown in chapter 6.3.5

Fan Speed

No Air Leaks

Meter Unit Hose Removed

Tank Lid Unlocked

2900 RPM

3800 RPM

«
...
39
40
41
42
43
...
»

Содержание DSX 40









































































Отзывы:

Нет отзывов