Horizon Fitness CE8.8, Руководство пользователя

Страница: 7 / 45

13 12
HARDWARE FOR STEP 3
PART TYPE QTY
G SOCKET CAP BOLT 4
H SPRING WASHER 4
I FLAT WASHER 4
ASSEMBLY STEP 3
4 3 2
H
I
G
A
Open HARDWARE FOR STEP 3 .
B
Align GUIDE RAIL SET (4) with MAIN
FRAME (2) as shown.
C
Lift up on the MANUAL INCLINE LIFT
LEVER (3) and place it in one of the holes
inside the MAIN FRAME (2) .
D
Attach the GUIDE RAIL SET (4) to the
MAIN FRAME (2) using 4 BOLTS (G) ,
4 SPRING WASHERS (H) and 4 FLAT
WASHERS (I) .
2
7
5
9
K L
B
8
6
J
NOTE: Be
careful not
to pinch any
wires while
attaching the
console mast.
ASSEMBLY STEP 4
A
Open HARDWARE FOR STEP 4 .
B
Carefully pull the CONSOLE CABLE (5)
through the CONSOLE MAST (6) using
the twist tie located inside the CONSOLE
MAST (6) .
C
Attach CONSOLE MAST (6) to MAIN
FRAME (2) using PRE-INSTALLED
BOLTS AND WASHERS (7) .
D
Slide WAVY WASHER (J) over CRANK
(8) followed by PEDAL ARM (9) as shown.
Rest pedal arm wheel on guide rail.
E
Attach the PEDAL ARM (9) to the CRANK
(8) using 1 FLAT WASHER (K) , 1 SPRING
WASHER (B) and 1 BOLT (L) .
F
Repeat steps D–E on the opposite side of
the elliptical.
HARDWARE FOR STEP 4
PART TYPE QTY
J WAVY WASHER 2
K FLAT WASHER 2
B SPRING WASHER 2
L BUTTON HEAD BOLT 2
HZ14_OM_NA_CE8.8_Rev1_2.indd 12-13 6/4/14 8:59 AM