BEFORE
YOU
BEGIN
12
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL
OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
1
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP
ASSEMBLY
STEP 6
NOTE: There is NO hardware bag for this step.
A) Remove
PRE-ATTACHED SET SCREWS
from right
UPPER HANDLEBAR.
B) Slide right
UPPER HANDLEBAR
onto
LOWER HANDLEBAR
and secure by reinserting
PRE-ATTACHED SET
SCREWS
C) Snap the front and back
HANDLEBAR COVERS
together onto the
UPPER HANDLE BARS
.
Note the position of the snap tabs on the covers before snapping into position.
D) Repeat on other side.
HANDLEBAR COVERS
UPPER HANDLEBAR
CONSOLE MAST
PRE-ATTACHED BOLTS AND WASHERS
UPPER HANDLEBAR
PRE-ATTACHED SCREWS
LOWER HANDLEBAR
SCREWS (Q)
INSIDE ELBOW COVER
OUTSIDE ELBOW COVER
ELBOW JOINT
A) Open
HARDWARE BAG FOR STEP 7.
B) Attach the
OUTSIDE ELBOW COVER
to the
ELBOW JOINT
using 1
SCREW (Q)
.
C) Snap the
INSIDE ELBOW COVER
onto the
OUTSIDE ELBOW COVER
.
Note the position of the snap tabs before snapping into position.
D) Attach the
INSIDE ELBOW COVER
to the
ELBOW JOINT
using 1
SCREW (Q)
.
E) Repeat on other side.
HARDWARE BAG FOR STEP CONTENTS :
SCREW (Q)
15 mm
Qty: 4
CE6.0_Rev.1.3.indd 12-13
7/7/08 4:42:03 PM