Horizon Fitness 55HL810F, Руководство по эксплуатации

Страница: 46 / 105

English - 17 -
keyboard. You can use this keyboard via the navigation
buttons and the OK button on the remote control.
Wait until the IP address is shown on the screen.
This means that the connection is now established. To
disconnect from a wireless network press
OK .
You can navigate between menu tabs by pressing left/
right buttons. The help bar on the bottom of the dialog
shows features that you may use. Press the BLUE
button to check your internet connection speed. Press
the GREEN button to switch to advanced mode and
then press the
OK
button to edit settings.
You can check the signal strenght by using the network
settings menu for the wireless device mode.
Other Information
Configuration Status : Displays Wi-Fi status as
connected or not connected.
IP Address : Displays the current IP address.
Network Name : Connected networks’ name will be
displayed.
Delete Saved Wi-Fi Profiles
Saved profiles will be deleted if you press the RED
button while the wireless device selection OSD is on
the screen.
Connecting to your mobile Phone via WiFi
• If your mobile phone has WiFi feature, you can
connect your mobile phone to your TV by using a
WiFi connection via a router, in order to play content
from your phone. For this, your mobile phone must
have an appropriate sharing software.
• Connect to your router following the steps stated
above in the Wireless Connection section.
• Afterwards, engage your mobile phone with the router
and then activate the sharing software on your mobile
phone. Then, select files that you would like to share
with your TV.
• If the connection is established correctly, you should
now be able to access the shared files from your
mobile phone via the Media Browser of your TV.
• Enter the Media Browser menu and the playback
device selection OSD will be displayed. Select your
mobile phone and press the OK button to continue.
• A virtual remote controller application could
be available for download in your smartphone
application providers server. Not all smartphones
are supported by this application.
Note: This feature may not be supported on all mobile
phones.
Connectivity Troubleshooting
Wireless Network Not Available
• Ensure that any firewalls of your network allow
the TV wireless connection.
• Try searching for wireless networks again, using the
Network Settings menu screen.
If the wireless network does not function properly,
try using the wired network in your home. Refer to
the Wired Connection section for more information
on the process.
If the TV does not function using the wired
connection, check the modem (router). If the
router does not have a problem, check the internet
connection of your modem.
Connection is Slow
See the instruction book of your wireless modem to get
information on the internal service area, connection
speed, signal quality and other settings. You need to
have a high speed connection for your modem.
Distruption during playback or slow
reactions
You could try the following in such a case:
Keep at least three meters distance from microwave
ovens, mobile telephones, bluetooth devices or any
other Wi-Fi compatible devices. Try changing the
active channel on the WLAN router.
Using DLNA Network Service
DLNA (Digital Living Network Alliance) is a standard
that eases the viewing process of digital electronics
and makes them more convenient to use on a home
network. For further information, visit www.dlna.org.
The DLNA standard allows you to view and play
photos, music and videos stored in the DLNA media
server connected to your home network.
1. Nero Media Home Installation
The DLNA function cannot be used if the server
program is not installed onto your PC. Please prepare
your PC with the Nero Media Home programme. For
more information about the installation, please refer
to the “Nero Media Home Installation” section.
2. Connect to a Wired or Wireless Network
See the chapter Network Settings for detailed configuration
information.
3. Play Shared Files via Media Browser
Select Media Browser by using the Left or Right
buttons from the main menu and press
OK
. The Media
browser will then be displayed.
DLNA
DLNA support is only available in the Media Browser
folder mode. To enable folder mode, go to the Settings
tab in the main media browser screen and press OK . In
the settings options, highlight View Style and change to
Folder using the Left or Right buttons. Select the desired
media type and press OK.
If sharing configurations are set properly, an OSD
message will be displayed after selecting the desired
media type. Select
OK
to display the selected network