24/02/2021
Ver. 5
13
Laying the fire - 850 Ceramic Log
P O S I T I O N I N G O F
A L L L O G S
• It is important to follow the log recommended
positioning.
• Log NO. 6, 10, 9 and 4 must be pinned to rear log
with pins provided.
• Not doing so can adversely effect the operation
of the appliance.
• This diagram shows the recommended
log positions, when viewed from above.
2 . L O C AT E L O G N O. 1
:
This is the largest log that is positioned at the rear of
the grate. Two locating pins are positioned at the
rear of the burner. The large log has two holes on
the underside to position in place.
1 . L O C AT E
4
C E R A M I C
C OA L S :
Four ceramic coals are supplied with the burner base.
These coals must be laid in the position indicated on
the drawing with the taller coals on the ends and
smaller coals in-between.
3 . LOCATE LOG N
O’S 2 & 3
Two front log
NO’S. 2 & 3 are supplied to fit into the
space between the metal frame and the ceramic base.
These logs do not cover the front burner ports but are
designed to deflect the front flame back into the fire.
L O G S
Only use logs supplied
by the manufacturer as
other logs may effect
combustion performance
Installation Instructions Kemlan Natural Draft Horizon Edge Gas Fireplaces
