www.horizoneducational.com | [email protected]
-
2
ASSEMBLE THE REAR END
Attach the Motor from RESK-02B to the gearbox by sliding it in the appropriate location.
Make sure to push in firmly so that the gear on the motor properly engages the gears in the
gearbox. (A)
Firmly press on the wheels to both ends of the Axle. (B)
A
B
Make sure the hole in the chassis is aligned to the exposed gear on the Gearbox. (C)
Use 2 of the long screws to attach the gearbox to the Chassis. (D)
Use the provided Screw Driver and Wrench to firmly tighten the screws. (E)
C
D
E
Wheel allignment can be changed depending on which direction you want the vehicle to go.
For best results set as straight as possible for easy distance calculation.
DIY Chassis Kit
/DIY Chassis Classroom Pack
Attaching the Gearbox to the Chassis
A
ssembling
the Gearbox
