horiba OCMA-500, Инструкция по эксплуатации

Страница: 33 / 141

Basic Operation
13
Connecting a USB memory stick
This section explains how to connect a USB memory stick with the product.
When a USB memory stick is connected, the following operations can be performed.

Saving the measurement history to a USB memory stick

Saving the calibration history to a USB memory stick

Saving the settings of the main unit to a USB memory stick
Note

Some USB memory stick may not work with the OCMA.
Use a FAT/FAT32 formatted USB memory stick. Other formats may not be available with this
product.
Even FAT/FAT32 formatted, some USB memory sticks may not work. In this case, try other type.
If you need the USB memory stick manufactured and verified by HORIBA Advanced Techno,
contact your local dealer.

Do not lose the cap for the USB memory port.

When handling liquids during measurement, calibration, or otherwise, remove the USB memory
stick from the USB memory port and cap the port. If a liquid spills on a USB memory stick or the
USB memory port, the liquid may enter the interior of the product from the USB memory port and
cause product damage.

If any of the operations are attempted without inserting a USB memory stick into the USB
memory port, a message of "Process has failed" will appear.

For details on each of the operations, refer to "USB Memory screen" (page 61).
1.
Remove the cap from the USB memory port on the left side of the product.
2. Insert the USB memory stick into the USB memory port.
Fig. 16 Inserting a USB memory stick
The USB icon lights up on the screen.