horiba OCMA-500, Инструкция по эксплуатации

Страница: 81 / 141

Data Management
61
USB Memory screen
If [USB Memory] is selected on the Data Top screen, the USB Memory screen opens.
The USB Memory screen shows a menu for USB memory operations.
If an operation is selected with the up/down button and the ENT button is pressed, an
execution confirmation message for the selected operation appears. To execute the selected
operation, press the ENT button while the execution confirmation appears.
Note

Some USB memory stick may not work with the OCMA.
Use a FAT/FAT32 formatted USB memory stick. Other formats may not be available with this
product.
Even FAT/FAT32 formatted, some USB memory sticks may not work. In this case, try other type.
If you need the USB memory stick manufactured and verified by HORIBA Advanced Techno,
contact your local dealer.

To execute the operations with the USB Memory screen appearing, a USB memory stick must be
connected to this product.

If any of the operations are attempted without inserting a USB memory stick into the USB
memory port, a message of "Process has failed" will appear.

To connect a USB memory stick, refer to "Connecting a USB memory stick" (page 13).
Fig. 61 USB Memory screen
Table 11 Menu on the USB Memory screen
The buttons and button functions, which can be used with the USB Memory screen appearing,
are described in the table below.
Table 12 Button functions with the USB Memory screen
Item Description Page
Save Measurement History Shows an execution confirmation for [Save Measurement History]. page 62
Save Calibration History Shows an execution confirmation for [Save Calibration History]. page 63
Save Settings Shows an execution confirmation for [Save Settings]. page 64
Button Function Page
ENT button Shows an execution confirmation for the selected item. -
Up button Selects the next item up. -
Down button Selects the next item down. -