Horiba Scientific LAQUAact-PH110, Инструкция по эксплуатации

Страница: 70 / 122

Ion concentration measurement
50
Note
• The criteria of stability judgment in the auto hold measurement are as follows.
Potential variation for 10 seconds is less than 1 mV and temperature variation is less than
2.0°C
• If the measured value is below the display range, "Ur" (under) appears. If the measured
value is above the display range, "Or" (over) appears. For details on the action to take,
refer to "The measured value is out of the measurement range" (page 93).
●
Saving measured value
To save the measurement data, press the key in the screen that you want to save.
For details, refer to "Saving measurement data in the internal memory" (page 14).