Horiba Scientific LAQUAact D-72G Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 94

background image

Product Handling Information

XII

■

Product Handling Information

●

Operational precautions (instrument)

・

Only use the product including accessories for their intended purpose.

・

Do not drop, crash, or give any physical impact on the instrument.

・

The instrument is made of solvent-resistant materials but that does not mean it is

resistant to all chemicals. Do not dip the instrument in strong acid or alkali solution, or
wipe with such solution.

・

If the instrument is dropped into water or gets wet, wipe it using soft cloth. Do not heat

to dry it with a hair-dryer (or the like).

・

The instrument has a dust-proof and waterproof structure. Waterproof performance is

following specification: the instrument does not malfunction even when immersed in
water of 1 m depth for 30 minutes.
This does not mean to guarantee non-destructive, trouble-free, dust-proof, and
waterproof performance in all situations. If the instrument is correctly handled
according to the descriptions in this manual, the instrument provides dust-proof and
waterproof performance.

・

When replacing the batteries, while connected to the AC adapter, the instrument does

not have the dust-proof and waterproof performance. The dust-proof and waterproof
performance is maintained only when the covers are attached correctly.

・

After replacing the batteries or connecting the AC adapter, make sure that the

waterproof packing attached to each cover is not deformed or discolored, or has
foreign matter adhering to it. If the waterproof packing is deformed, discolored or has
foreign matter adhering to it, or dust could get inside, water leaks could occur that
could lead to instrument malfunction.

・

To disconnect an electrode or AC adapter cable, hold the connector and pull it off. If

you pull at the cable, it may cause a breakage.

・

Do not replace the batteries or connect the AC adapter in a dusty place or with wet

hands. Dust or moisture could get inside the instrument, possibly causing instrument
malfunction.

・

Do not use the tip of a nail or an object with a sharp end to press the keys.

・

If the power supply is interrupted while measurement data is being saved in the

instrument, the data could be corrupted.

・

A Ni-MH rechargeable battery can be used in this instrument, but the battery used in

the instrument cannot be charged using the AC adapter.

«
...
12
13
14
15
16
...
»

Содержание LAQUAact D-72G































































































Отзывы:

Нет отзывов

Похожие инструкции для LAQUAact D-72G

Бренд: Danfoss Страницы: 8

Бренд: Yamaha Страницы: 69

NUFLO Scanner 2000 microEFM

Бренд: Cameron Страницы: 8

Бренд: DAVIS Страницы: 12

Бренд: JAMAR Technologies Страницы: 4

Бренд: Jamar Страницы: 60

Бренд: Yamaha Страницы: 10

Бренд: Yamaha Страницы: 38

Бренд: Yamaha Страницы: 45

Portable Grand DGX-670

Бренд: Yamaha Страницы: 93

Portatone PSR-410

Бренд: Yamaha Страницы: 65

Бренд: Kawai Страницы: 40

Бренд: Sper scientific Страницы: 56

Бренд: Aqualytic Страницы: 140

2-WIRE EMM.630CT-MID

Бренд: Qonnex Страницы: 2

Бренд: Dakota Digital Страницы: 38

Бренд: Swema Страницы: 4

Бренд: Parkside Страницы: 199

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды