Motion Aim sensitivity can be adjusted to three levels.
◆ Motion Aim Sensitivity
Slow
Fast
Level 1（Snipe Mode）
Lowest sensitivity.
Allows precise aiming and movement for long
range aiming.
Level 2（Normal）
This is the default sensitivity.
Level 3（Quick Mode）
Highest sensitivity
Effective for quick aiming and movements,
such as for short-range aiming.
* By default, the Motion Aim sensitivity is set to Level 2 (Normal).
Operation
LED Status
Settings
Push and hold
for 3 Seconds
Start Settings
* While setting functions,
all buttons on the controller
will not respond.
Push
Settings complete
Level 3（Quick Mode）
Level 2（Normal）
* This sensitivity level is set
by default.
Level 1（Snipe Mode）
①
②
③
*1 The Left Analog Stick must be returned to the neutral position before changing the setting again.
*2 The Motion Aim LED (Blue) will be lit when in use.
If settings are adjusted while the Motion Aim selector Switch is set to "OFF", the motion aim LED (Blue) turns off in step ③.
* If no buttons are pressed at ① and if the Lelft Analog Stick is not moved up or down for more than 4 seconds at ②, the Function
LED (Red) will switch off and the settings function will close.
* Sensitivity will be set for both Mode 1 and Mode 2. * Settings will be saved even if the controller is unplugged.
Move the Left Analog Stick
up or down
*1
or
Move the Left Analog Stick up or down to
change the sensitivity by one level.
Motion Aim LED
(Blue)
Function LED
(Red)
Slow Blinking
Slow Blinking
Slow Blinking
Slow Blinking
LED Off
LED Off
3 Blinks
2 Blinks
1 Blink
LED On
*2
Sensitivity Level 2
(Normal Mode)
Sensitivity Level 3
(Quick Mode)
Sensitivity Level 1
(Snipe Mode)
Controller Tilt
Input
8
