How to connect
Mode Toggle Switch
Joystick
Throttle
Modular
Connector
Xbox One console USB port
①Insert the modular connector to the joystick modular jack.
②Insert the USB connector to the Xbox One.
*Plugging and unplugging during gameplay may
cause a malfunction.
*Reconnect the connector if any malfunction occurs.
USB Connector
Can toggle between Flight Mode and PAD Mode.
* Toggle the switch before connecting.
* Ace Combat 7: Skies Unknown is not compatible with Flight Mode.
The Inline Release
①
②
Your controller cord has an inline release. This is a safety feature designed to reduce the chance of the Xbox One console
or computer falling when the cord is pulled.
If the console or computer falls and hits someone, especially a small child, it could cause serious injury.
To reduce the risk of injuries or damage to the console or computer,
it is important to use the controller and the inline release properly.
Use the controller connector, not the inline release, to routinely connect and disconnect the controller.
If an inline release disconnects, simply reconnect it by aligning the grooved indentations and
pressing the two parts completely together.
The controller will not work unless the inline release is connected properly. Never tape, glue,
or otherwise prevent an inline release from pulling apart.
The inline release reduces, but does not eliminate, the risk of the computer or console being pulled off its surface.
To further reduce the risk:
• Do not allow anyone to pull on the controller or controller cord in a way that causes the computer or console to move.
• Do not allow controller cords to become crossed or tangled with one another.
