can use Google Maps, GPS, and other tools, combined with the
horizontal lobe width of the CPE device to roughly determine the
orientation of the CPE.
3.2 Configuration instructions
The pairing IDs of the master and slave must be the same. The
default is consistent and does not need to be changed.
For example, point to point use scenarios in elevators,
different elevator bridges recommended to use a different ID;
In a point to multipoint scenario, the ID number of each slave
needs to be consistent with the master.
In a one-to-many scenario, the number of clients allowed to
access the master must be adjusted. By default, only one
client is allowed to access.
The channel of the master and slave must be the same, the
default is the same without change;
The wireless passwords of the master and slave must be
