Revision -
7 of 22
SECTION 3 – Pre-Installation Inspection
Included in your off-road top are the following components:
Pre-assembled
Audio Shade
off-road top. (All speakers and electronics come
preinstalled with interior wire harness.)
Chassis wire harness.
Rear light bar extension harness.
Four (4) cage clamps.
Hardware bag.
If any of the parts are missing, damaged, or you have any questions concerning them,
please call Hoppe at (262)-552-2770 Mon-Thur. 8am-5pm CST
.
In addition to accounting for all of the parts that you should receive with the top, you
should inspect the vehicle in the following ways.
Ensure that the vehicle is equipped with the factory roll cage, and the roll cage has
not been bent out of shape in a roll over.
Make sure the vehicle does not have any aftermarket accessories that are
incompatible with the top.
Note: This top is designed to be compatible with
most factory windshields.
Make sure the battery is in good condition and holds a charge.
Make sure the charging system is in good condition.
