
4
Replace the batteries when any of the following happens
• The
+Lo
shows
• The display dims
• The display does not light up when powering on
BEFORE YOU START
♥
Installing and Replacing the Batteries
1.
Slide off the battery cover on the back of the unit.
2.
Install the batteries by matching the correct polarity, as shown below.
Always use the correct battery type (2 alkaline AAA size)
3.
Replace the battery cover.
• If this device will be stored for an extended period of time, please remove the batteries
in order to avoid corrosion.
• Used batteries are harmful to the environment, so please dispose of appropriately.
Remove the old batteries from the device and follow your local recycling guidelines
• Battery corrosion is not covered under your three year limited warranty.
CAUTION
!
527014_HMPDigitalBPWristManual_May2018.indd 6
5/1/18 4:31 PM