Hope Electronics Technology
Manual
Edition
V2.0
44
Chapter 6 Other Function
6.1.Averaging Function
This function averages the measurement values in order to display a single value. It helps to
stabilize fluctuations in the measured values.
When the test value is not stable, the average function can be used. The average number can be
selected as 2, 3, or 4.
1. Press
[SYS]
on the test page. Switch to the system Settings interface.
2. Press the direction key to move the cursor to the average number of times.
Press
[ENTER]
to select the average number of times you want to set, and press left and right to
switch OFF, 2,3,4. Press [ENTER] again to complete. Press
[ESC]
to return to the measurement
interface.
