Installation Instructions
10
UM17E User Manual, June 2010
b� If using the included CD-ROM, insert it into the host computer's CD-ROM
drive� If the CD does not automatically run, browse the contents of the CD
and open the
readme�htm
file� Select the appropriate driver�
2� Click to "Run" the software when prompted� Follow on-screen instructions to
download and execute the touchscreen driver installation�
3� A cable retention bracket comes installed on the USB port on the rear of the monitor
and will help to secure the cable and ensure adequate strain relief� Route one end of
the USB cable through the retention bracket and connect it to the USB Type B input
port on the rear of the monitor� Connect the other end to the USB port on the host
computer�
Calibrate the Touchscreen
Once the driver has finished installing, you are ready to calibrate the touchscreen� Open the
touchscreen's Control Panel, located in the host computer's Control Panel�
NOTE:
Some touchscreen drivers have an "Enhanced Calibration Mode" option� If applicable
to your particular driver, this setting may be found in the touchscreen's Control Panel under the
"Mode" tab�