Hope Industrial Systems HIS-ML18B, Руководство пользователя

Страница: 5 / 19

5
Adjusting the Screen Image
Use the buttons on the rear control panel to display and adjust the On-Screen Display (OSD) con-
trols which display on the screen.
Do the following to adjust the screen image:
1
To display the Main Menu, press button [1].
NOTE: All OSD menus and adjustment screens disappear automatically after about 30 seconds.
2
To select a control you want to adjust, press
▲
or
▼
to scroll up or down the Main Menu.
3
After the control is selected, press button [2]. A control screen like the one shown below ap-
pears.
4
To adjust the control, press the up
▲
or down
▼
buttons.
5
To save the adjustments and exit the menu, press button [1]
twic
e.
The following tips may help you optimize your display:
• Adjust your computer's graphic card so that it outputs a video signal 1280 x 1024 @ 60 Hz to the
LCD display. (Look for instructions on "changing the refresh rate" in your graphic card's user
guide.)
• If necessary, make small adjustments using H POSITION and V POSITION until the screen
image is completely visible. (The black border around the edge of the screen should barely touch
the illuminated "active area" of the LCD display.)