7
Installation Instructions
Preparing for Installation
Important! Perform the following steps BEFORE Installation of the moni-
tor into the panel.
1.
Ensure that sufficient power is available.
2.
Ensure that sufficient space is available to allow for proper air flow into and
out of the unit.
3.
Ensure that the air temperature around the unit (top and bottom) will not ex-
ceed the rated specifications of the unit.
The maximum rated temperature of the HIS-ML12 is 50
°
C (122
°
F)
Remember that heat rises – the temperature at the top of the cabi-
net will be much hotter than at the bottom when the air is not cir-
culating.
Also, remember that even though this product is designed to oper-
ate at 50
°
C, the life span of any electronic device is shortened
when it is consistently operated at high temperatures. Therefore it
is wise to take steps to keep the temperature of the ambient air
around the unit as low as possible.
4.
Ensure that the ambient humidity of the air around the unit does not exceed
the rated specifications for the unit
The maximum rated humidity for the HIS-ML15 is 90% non-
condensing