background image

10

4.13 With fingers under filter door lip, pull filter frame (A) 
out and away from vacuum body. Hold filter over a trash 
receptacle and tap out dirt and debris.
4.14 Bottom filter (B) must be pushed back into place first. 
4.15 Then push the upper handle in (C) until it clicks.
4.16 Filter diagram: (B) bottom filter. (C) upper handle.

C
B

DO NOT RINSE OR WASH THE FILTER 

MADE WITH HEPA MEDIA.

IMPORTANT

Filter Made With HEPA Media: How to Clean

Actual model may vary from images shown.

Cyclonic Filter Assembly: How to Clean

Remove dirt cup and twist the dirt cup handle counterclockwise 
to open and remove lid as described in 4.6.
4.9 Pull filter assembly (G) out of dirt cup and remove.
4.10 Dirt and debris can be cleaned from the filter assembly 
with the adjustable dusting brush. 
4.11 Place the filter assembly on the dirt cup. Line up tabs (H) 
on lid with dirt cup body.
4.12 Replace dirt cup lid and twist clockwise until locked in 
position. 
Replace dirt cup as described in Fig 4.5.

To reduce the risk of personal injury - Unplug before 
cleaning or servicing. Do not use vacuum without dirt 
cup or filters in place.
Do not use vacuum without dirt cup or filters 

 

in place.

4.9

4.10

G

4.11

H

4.12

4.14

4.13

4.15

4.16

WARNING

!

!

To reduce the risk of personal injury - Unplug before 

cleaning or servicing. Do not use vacuum without dirt cup 
or filters in place.

WARNING

!

!

Filter Made With HEPA Media

When used and maintained properly, your Filter should not need 
replacement within the warranty period. If desired, additional filter is 
available at Hoover.com or call 1-800-944-9200. Ask for Hoover

®

 Part 

No. 440005573.

IMPORTANT

Allow filter to dry completely before replacing. Dry filter on 

edge so air circulates on both sides of filter. This may take 
up to 24 hours.

When used and maintained 

properly, your Rinsable 

Filter should not need 

replacement within the 

warranty period. If desired, 

additional filter is available 

at Hoover.com or call 

1-800-944-9200.  Ask for 

Hoover

®

 Part 

No. 

304087001

.

What to Buy:

Rinsable Filter 

4.8

4.8 Replace dirt cup lid and twist clockwise until locked in 
position. 
Replace dirt cup as described in Fig 4.5.

A

C

B

Содержание WindTunnel 2 Whole House Rewind

















Отзывы: