Hoover WDXC 4751, Инструкция по эксплуатации

Страница: 13 / 28

EN
13
l
It is possible to cancel the delay start by
turning the programme selector to
OFF.
If there is any break in the power supply
while the machine is operating, a special
memory stores the selected programme
and, when the power is restored, it
continues where it left OFF.
It allows you to do a preliminary wash at the
beginning of the cycle. The temperature does
not exceed 40°C and in any case it does not
exceed the maximum temperatures of the
selected washing program (ex. the temperature
of HAND program will be 30°C.
l
Ensure that the programme selector is
not in the
OFF position then press the
button to select the required drying
programme: an indicator will light to
display the drying result selected each
time you press the button.
l
To cancel the selection before the start of
a drying programme, press the button
repeatedly until the indicators go out or
return the programme selector to the
OFF
position.
l
To cancel the cycle during the drying
phase, hold the button down for about
3 seconds until the cooling indicator
lights up.
l
Given the high temperature inside the
drum, we recommend that you allow the
dryer to complete the cool down period
before returning the programme selector
to the
OFF position and removing the
laundry.
l
By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
l
To reactivate the spin cycle press the button
until you reach the spin speed you would
like to set.
l
It is possible to modify the spin speed
without pausing the machine.
When you select a program, the light
illuminates the recommended temperature.
It is also possible to change the
temperature but not over the maximum in
order to save the fabrics.
The button becomes active when you select
the
RAPID program on the knob; it allows you
to select one of three durations indicated.
The option buttons should be selected
before pressing the START/PAUSE
button.
If an option is selected that is
not compatible with the selected
programme then the option indicator
first flashes and then goes off.
PREWASH button
DRYING SELECTION button
SPIN SPEED button
To prevent damage to the fabrics, it is
not possible to increase the speed
over that which is automatically
suitable during the selection of the
program.
The machine is fitted with a special
electronic device, which prevents the
spin cycle should the load be
unbalanced.
This reduces the noise and vibration in
the machine and so prolongs the life of
your machine.
TEMPERATURE SELECTION
button
RAPID LENGTH button