Hoover U8161, Руководство пользователя

Страница: 4 / 13

4
Remove label (C) from Custom
Control™ switch.
If label has come off during
assembly, make sure switch is in
OFF (down) position before plug-
ging into electrical outlet.
1-6 1-7 1-9
1. Handle
2. Custom Control™ power
switch
3. Custom Control™
indicator
4. Tool cover
5. Dusting brush
6. Powered hand tool
7. Furniture nozzle
8. Dirt cup
9. Dirt cup handle
10. HEPA cartridge filter
11. Pre-filter
12. Final filter
13. Three position handle
release pedal: step on
lever to lower handle to
operating or low positions.
14. Nozzle control knob:
slide knob to correct
setting for height of
carpet being cleaned.
15. Furniture guard
16. Headlight
17. Edge groomers
18. Hose
19. Hose holder
20. Cord hooks:
wrap
cord around hooks for
storage. The top hook
rotates right or left for
easy cord release.
21. Extension wand
22. Crevice wand:
stores
in wand.
C
2-1
Cleaner description
1
2
3
12
13
6
7
8
9
11
10
16
15
14
17
20
19
21
21
5
2. How to use
22
4
18
The assembled cleaner will look like the drawing.
Operate cleaner only at voltage specified on data plate
on bottom of cleaner.
This cleaner is intended for household use.
Polarized plug
To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper outlet. Do not change the plug in
any way.
CARPET setting - turns brush rolls ON, for
cleaning carpets and rugs. (Brush rolls will
automatically stop turning when handle is
raised to upright position.)
BARE FLOOR setting - turns brush rolls
OFF for cleaning hard surfact floors.
Brush roll automatic
shut-off
If something gets caught in the brush rolls,
the cleaner will automatically turn off.
Slide the ‘Custom Control’ switch to OFF.
Unplug the cleaner.
Remove obstruction from brush rolls and
coninue cleaning.
Place hose on holder.
Push screws into holes on back of
handle (Fig. 1-6) and hose holder
(Fig. 1-7).
Tighten screws securely with a
Phillips screwdriver.
1-8
2-2
A
Custom Control™
switch
Plug cord into electrical outlet.