6
How to clean tools
To clean the hose, wipe off dirt with a
cloth dampened in a mild detergent.
Rinse with a damp cloth.
Cleaning tools may be washed in warm
water with a detergent. Rinse and air dry
before using.
14
D
E
G
Select proper tool
D. Dusting brush
may be used
for carved furniture, table tops,
books, lamps, lighting fixtures, venetian
blinds, baseboards, shutters, and regis-
ters.
E. Furniture nozzle
may be used for
upholstered furniture, draperies, mat-
tresses, clothing, automobile interiors,
and carpeted stairs.
F. Crevice wand
(stores inside exten-
sion wand) can be used in tight spaces,
corners and along edges in such places
as dresser drawers, upholstered furni-
ture, stairs and baseboards. It can also
be used for extra reach with the dusting
brush and/or extension wand.
G. Extension wand
is used to give
extra length to your hose. Use it with any
of the above tools.
15
Remove hose
When using cleaning tools,
cleaner handle should be in the
upright position.
Also,
turn cleaner
OFF before disconnecting and con-
necting the hose (G).
Remove hose end from cleaner base.
16
H
Attach wand and tools
The tools are attached to the hose
or the wand in the same manner.
Push tool firmly onto hose; twist tool slightly
to tighten or loosen connection.
Attach second wand or tool to the wand in
the same manner.
19
18
Extra reach hose
(available at additional cost)
The extra reach hose provides easier
cleaning of stairs and hard to reach
places. Follow the steps below for attach-
ing and detaching hose.
Turn cleaner OFF before disconnecting
and connecting hose.
Remove hose end from cleaner
base.
Align end of extra reach hose with projec-
tions (I) with slots (J) on end of attached
hose.
Slide hose into slots and twist
hose to lock it into place. (To
detach hose, reverse procedure.)
Attach wands or tools to the other end of
hose.
I
J
Cleaning tools
Tools allow for cleaning surfaces above
the floor and for reaching hard to clean
areas.
The cleaner is ready for tool use when
handle is in upright position.
CAUTION: Agitator continues to
rotate while cleaner handle is in
upright position. Avoid tipping clean-
er or setting it on furniture, fringed
area rugs or carpeted stairs during
tool use.
17
Replacing hose
When you are finished cleaning
with the tools, use the end of the
hose to push the cover (H) down and
push hose onto opening.
Twist hose end slightly to tighten the
connector.
F
G
14
15
16
17
18
19
Содержание U5162
Страница 12: ...12...
