4
13
Secure hose to rack at numbered locations as shown.
(Fig. 13)
(some models only)
(some models only)
Attach lower hose holder
Push screw into hole and tighten securely with a Phillips screw
driver (Fig 10).
With front of deep cleaner resting on floor, place 2 projections
on lower hose holder into 2 holes on back of cleaner (Fig 9).
10
Storing hose and nozzle on rack
9
TRIGGER
11
NOZZLE CONNECTOR
END OF HOSE
SOLUTION
HOSE
CONVERTER
END OF HOSE
14
1
2
4
3
Converter is stored in area as
shown.
8
Press cord into cord clip on back of handle.
Pull cord tight (Fig. 8).
HOSE
HOLDER
PROJECTIONS
HOLES
EXTENSION
HOOK
While aligning arrows (Fig. 14), place extension into bottom of
converter opening; then push converter firmly against deep
cleaner until it snaps into place.
Secure solution hose to converter as shown.
To remove, first pull top of converter off extension then pull off
bottom.
To store hose on rack, begin by placing
nozzle connector end
of hose (straight end)
into
clip 1
on rack (Fig. 12).
HANDLE
CORD
HOOK
12
CLIP 1
CLIP 1
2
2
NOZZLE
CONNECTOR
ALIGN ARROW
& HOOK FOR
CONVERTER
STORAGE
Stretch hose out and identify ends.
Note:
You may find it helpful when storing the hose and nozzle
to refer to the
information on the back of the deep cleaner
and on the converter end of the hose
(Fig. 11).
Assembly
