Hoover SM4000C4, Инструкция по эксплуатации

Страница: 5 / 7

2
FEATURES
HOW TO USE
1. Insert Car Plug into Car supply (DC 12V).
2. Push the switch to ‘ON’ position to begin cleaning and to turn off move the switch to the ‘OFF’ position.
3. Empty and clean the unit and filter after each use.
4. To empty the bin pull the bin open trigger, the dust bin flap will open and stop about 45 °position for debris to empty easily.
[1]
IMPORTANT:
For best results clean the filter after each use.
A. On/Off switch
B. Removable Crevice Tool
C. suction Inlet
D. Dust Bin Flap
1. Pull the trigger and the dust bin flap will open automatically. [5]
2. Rotate and remove the filter. [6]
3. The container may be cleaned using a wet cloth.
4. The filter should be washed in hand warm water DO NOT UsE DETERGENTs. Make sure all are completely dry before replacing
in your cleaner.
5. Replace the filter into the dust container and close the dust container flap.
NOTE: you should experience any difficulties in dismantling the unit or for more detailed information about treatment, recovery
and recycling of this product, please contact your local city office, your household waste disposal service.
IMPORTANT INFORMATION
Hoover spares and Consumables
Always replace parts with genuine Hoover spares. These are available from your local Hoover dealer or direct from Hoover. When
ordering parts always quote your model number.
Cloth Filter s103 35601645
Microfiber Filter s105 35601646
FILTER MAINTENANCE
Removable Crevice Tool
Fit the crevice tool onto the dust cup to clean corners and hard to reach areas. [2]
dust Brush
Fit the Dust Brush onto the dust cup to clean keyboards and other delicate areas.
[3]
Crevice Brush*
Insert one end of flexible hose into the suction Inlet,and attach the Crevice Brush to the other end of the flexible hose. [4]
ATTACHMENTS
*certain models only ** May vary according to model
E. Car Plug
F. Dust Brush
G. Dust Bin Open Trigger
H Flexible Hose*
I
Crevice Brush*