Hoover SE234, Инструкция

Страница: 10 / 28

A Ad djju ussttiin ng g tth he e ffe ee ett
Once the machine is in place the feet should be adjusted to
ensure that the machine is level. If the machine is not level it
may become noisy or move.
Adjust the feet on the front corners of the machine until the
machine is firm and level.
When the machine is firm and level, tighten the locking nuts
on the two feet.
Refer to “Selecting the wash programme” for details of how
to select programmes.
1 1.. Turn on the water supply and check for leaks from the fill
hose.
2 2.. Switch on the electricity supply.
3 3.. Select the spin programme and press the ON/OFF
button to start the machine. Allow the programme to
continue for one minute and then cancel the programme
by switching the machine OFF. This will remove any water
remaining in the machine from factory testing.
4 4.. To check for cold water filling to the machine:
Select the rinse programme and press the ON/OFF
button to start the machine. Allow the tumble action to
continue until the water has pumped out. Check that the
drain outlet is not leaking or overflowing.
5 5.. Switch off the machine at the end of the cycle.
6 6.. Select the spin programme and press the ON/OFF
button to start the machine. If the machine takes longer
than one minute to empty check the drain hose for kinks.
IIn nsstta alllla attiio on n tte essttiin ng g iiss n no ow w cco om mp plle ette e..
Now you have successfully installed the machine we advise
that you run the machine to ensure the drum is thoroughly
clean after testing and storage. Select Cottons 60°C
(Programme 2) and run the machine for a complete cycle using
only wash detergent and water.
T Th hiiss p prro og grra am mm me e w wiillll tta ak ke e a ap pp prro ox xiim ma atte elly y 2 2
h ho ou urrss tto o cco om mp plle ette e..
10
T Te essttiin ng g tth he e iin nsstta alllla attiio on n