Hoover PRO STAIR Скачать руководство пользователя страница 8

Страница: 8 / 12

- 8 -

Removing a blockage from the

Pet Hair & Allergen Remover*

(Certain models only)

Open clip and lift cover to remove

blockage.

If your cleaner is not picking up efficiently, the belt or
brushes (or both) may need replacing, but first make sure
you have:
•  Emptied the dust container
•  Cleaned filters
•  Checked for blockages

Remove hood

•  Prise off the Carpet Care Control selector
•  Remove hood screws A and B.
•  Lift off hood

Remove brush assembly

• Inspect belt for signs of wear.
• To remove, pull brush cleaner assembly upwards out of

cleaner housing. Remove belt from motor spindle then
from brush assembly.

Replace belt

• Loop the new belt around the motor spindle then

around the brush channel.

Refit brush assembly

• Hold the brush assembly

and stretch the belt until

brush mountings slot down
into the cleaner housing.
Rotate the brush to ensure
free movement of the belt.

Refit hood

• Refit hood, ensuring the

lugs along the front of hood
are located in the slots
along the front edge of

baseplate.

• Secure hood, using screws

A and B.

Refit Carpet Care

Control selector

• Ensure the raised face (T)

is towards the front of the

cleaner.

IMPORTANT: Switch cleaner off and

remove plug from electricity supply

before checking the brushes or removing

hood.

CHANGING BELT OR BRUSHES

This cleaner is unlikely to become blocked, except by

over filling of the dust container or accidentally picking

up large solid objects. Clearing a blockage is simple.

If cleaning tools were in use,
check cleaning tool and exten-

sion tube first. Next check

hose handgrip; to remove, grip
ribbed ring as shown, turn in
direction of arrow and ease

apart.

To check the hose, stretch it

to full length and switch on the
cleaner; the suction will dis-

lodge most obstructions. If this
is unsuccessful, switch off and
unplug the cleaner. Remove

the hose by turning it anti-

clockwise as shown. Detach

cassette and remove blockage.

For blockages in cleaner base:

1. Turn the cleaner over and
check that the brushes are
free to rotate.

2. Check for a blockage in
hose socket. Use a piece of

wire or a blunt flexible rod

to remove any obstructions.

CLEARING A BLOCKAGE

IMPORTANT: Switch the cleaner

off and remove the plug from the

electricity supply before dismantling

cleaner.

- 8 -

0565-5296.indd 8

29/11/2007 16:23:43

Содержание PRO STAIR













Результаты поиска

Содержание PRO STAIR

Отзывы:

Бренды по названию

Популярные бренды

Hoover PRO STAIR, Инструкция пользователя

Результаты поиска

Содержание PRO STAIR

Отзывы:

Бренды по названию

Популярные бренды