Hoover ONEPWR HAND VACUUM, Руководство пользователя

Страница: 8 / 29

• Remove the dry use filter.
• Inspect filter, lightly shake any dust or dirt from the filter,
or replace as necessary.
• Empty the collection container; wash out if necessary.
• Reinstall dry use filter.
• Before replacing the lid, make sure all pieces
are completely dry.
• Replace lid and lock securely.
Liquid Waste:
• Remove the battery pack.
• Unlock the four locking latches and remove the lid.
• Empty the collection container; wash out if necessary.
Before replacing the lid, make sure all pieces are com-
pletely dry.
• Replace lid and lock securely.
Cleaning/Replacing the Dry Use Filter
See Figure 10, page 10
• Remove the battery pack.
• Unlock the two locking latches and remove the lid.
• Remove the dry use filter by pulling the filter upward.
• Lightly shake any dust or dirt off the filter or replace as
needed.
• Reinstall the filter by aligning the filter to the bottom of
the tank and pressing firmly into place.
• NOTE: Make sure the filter is seated properly for dry
vacuuming. Remove the filter for wet vacuuming.
Storage
• Clean all foreign material from the wet/dry vac.
• Clean the outside of the collection container with warm water
and mild soap.
• Empty and clean the collection container, flexible hose,
nozzles, and attachments with warm water and mild soap and
allow to completely dry before storage.
• Store flexible hose and attachments inside the collection
container or on the lid.
• The collection container should be disinfected as needed and
before prolonged storage.
• Store indoors in a place that is inaccessible to children. Keep
away from corrosive agents such as garden chemicals and
de-icing salts.
MAINTENANCE
Do not turn unit upside down as liquid may enter the motor
unit and cause damage.
WARNING!
PG.7