CLEANER MAINTENANCE
Emptying the Dust Container
When the dust reaches the max level indicator on the container, empty the dust
container.
IMPORTANT:
To maintain optimum performance do not allow the dust to sit higher than
the max level.
1. Remove the hose from the cleaner.
[2]
2. Press the dust container release buttons on the bin cover
[18]
and lift the dust container
out of cleaner.
[19]
3. Hold the dust container upside down so that the pre-motor filter faces upwards.
Unlatch then unhinge the pre-motor filter frame and remove the pre-motor filter from
the frame.
[21]
If the filters are dirty refer to section ‘Cleaning the Washable Filters.
4. Hold the dust container over a bin, press dust container flap release button to empty
the dust.
[23]
USING yOUR CLEANER
PARkING AND STORAGE
GETTING TO kNOw yOUR CLEANER
ASSEMBLING yOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To
release the hose: simply press the two hose release buttons on the hose end and remove
hose.
[2]
2. Connect the handle to the tube upper end.
[3]
3. Connect the tube lower end to the carpet and floor nozzle**.
[4]
A. Cleaner main body
B. On-Off / Variable Power Control Roller
C. Dust container
D. Dust container Release Buttons
E. Hose Latch
F. Handle
G. Telescopic Tube
H. Telescopic Tube Adjusters
I.
Hose
J. Handle Hook
K. Telescopic Tube Parking Hook
L. Hose Release Buttons
M. Pre-motor Filter
N. Exhaust Filter
O. Exhaust Filter Cover Release Button
P. Carpet and Floor nozzle(
GP
)**
Q. Floor Type selector Pedal**
R. Crevice Tool
s. Dusting Brush
T. Nozzle Parking slot
U. Telescopic Tube Parking slot
V. Parquet Nozzle**
W. Pet Hair Remover Mini Turbo Nozzle*
X. Allergen Remover Mini Turbo Nozzle*
Y. Grand Turbo Nozzle*
*Certain Models Only ** Certain models only, nozzles may vary according to model
2
GB
1. Extract power cord and plug it into the power supply.
[5]
Do not pull the cord beyond
the red marker.
2. Adjust the telescopic tube to the desired height by moving the telescopic tube adjusters
up and raise and lower the handle to the most comfortable cleaning position.
[6]
3. Carpet & Floor Nozzle** - Press the floor type selector pedal on the nozzle
[7]
to select
the ideal cleaning mode for the floor type.
Hard Floor:
Brushes are lowered to protect the floor.
Carpet:
Brushes are raised for the deepest clean.
4. switch the cleaner on by turning the On - Off / Variable Power Control Roller clockwise
on the cleaner main body.
[8]
5. Adjust the power level by turning the On-Off / Variable Power Control Roller to the
desired level.
[8]
6. switch off at the end of use turning the On-Off / Variable Power Control Roller.
[8]
Unplug and gently pull the cord, the cord will begin to automatically retract back into
the cleaner.
[9]
The flexible hose and tube can be parked for temporary storage while in use
[10]
or in the
Nanopack storage position when not in use
[17]
:
1. Retract the telescopic tube to its storage length.
2. Remove the nozzle from the end of the telescopic tube.
[11]
3. Remove the hose handle from the telescopic tube.
[12]
4. Lift the hose latch at the rear of the cleaner [13] and wrap the flexible hose around the
product.
[14]
5. Park the hose handle on the product.
[15]
6. Assemble the nozzle into the parking slot underneath the product.
[16]
7. Assemble the telescopic tube into the remaining parking slot underneath the product.
[17]
P1. Carpet Nozzle (
CA
)**
P2. Hard Floor Nozzle (
HF
)**
