background image

Hold filter bag collar (A) as

shown. Align opening in filter

bag with dirt tube (B) inside the

outer bag.
Push bag collar firmly onto dirt tube.

Tuck in filter bag; zip outer bag.

5

The assembled cleaner will look
like the drawing.

1. Handle
2. ON/OFF switch
3. Cord hooks: 

wrap cord around

hooks for storage. Top hook rotates
for easy cord release.

4. Bag cap
5. Outer bag
6. Stair cleaning handle: 

located on

lower edge of bag.

7. Handle release lever: 

step on lever

to lower handle to operating or low
position.

8. Nozzle control knob: 

slide knob to

correct setting for height of carpet
being cleaned

9. Cleaner body
10. Furniture guard:

helps prevent 

cleaner from marking furniture.

11. Hood

16

16

Continued 

B

A

A

STEP 6 Attach filter bag

1

4

3

2

7

5

6

8

10

9

11

17

17

How to use

Cleaner description

Operate cleaner only at voltage speci-
fied on data plate on bottom of 
cleaner.

WARNING: Electrical shock could
occur if used outdoors or on wet sur-
faces.

To reduce the risk of electric shock, this
appliance has a polarized plug (one blade
is wider than the other). this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a quali-
fied electrician to install the proper outlet.
do not change the plug in any way.

ON/OFF Switch

To turn cleaner on, push switch up.

To turn cleaner off, push switch down.

CAUTION: When the cleaner is turned
ON, the agitator continues to rotate
while the handle is in the upright posi-
tion.

The cleaner can also be moved
by lifting it as shown.

21

21

Transporting
cleaner

To move your cleaner from room to room,
put handle in upright position, tilt cleaner
back on rear wheels, and push forward.

Handle positions

The handle of your cleaner has

three positions; 

upright

for storage and

when using cleaning tools;

operating

for general operation on carpet and
floors;

low

for reaching under low furni-

ture. Step on handle release lever to
lower handle.

Plug cord into electrical outlet.
Turn cleaner on and, with handle

in upright position, pull back on handle
until front of cleaner is lifted off the car-
pet. This insures that the filter bag is
inflated. 

18

18

19

19

20

20

Содержание Lightweight Commercial Cleaner










Отзывы: