Hoover LD626 Handy Wonder, Инструкция по эксплуатации

Страница: 11 / 16

Maintenance
11.
3. Take out the inlet filter, open the dust release button, grasp the
cone of the cyclone filter and turn it clockwise, you will hear a
click sound once it is unlocked, gently push the cyclone filter
upward to remove it. .
Hold the inlet filter and cyclone filter over a dustbin, knock
gently against all sides.
If needed, rinse them under the tap. Only rinse them with
lukewarm water.
Cleaning and Replacing the Inlet Filter and Cyclone Filter
2. Turn the cover in an anti-clockwise direction.
IMPORTANT! When the cyclone filter is covered with dust or the suction
power decreases considerably, the filters need to be cleaned. Please clean
the filter regularly, as this can optimise the performance and extend the life
of the cleaner.
WARNING! Never use the vacuum cleaner without filters.
IMPORTANT! Please put the cleaner on the floor before you clean the filters.
1. Press the dust canister release button, lift the dust
canister slightly upward and pull the dust canister away
from the unit.
IMPORTANT! Do not try to force it out
or the product will be damaged.