
Adjusting the plinth
The plinth/grille for this appliance comes with an adjustable section.
The process for adjusting the plinth trim is simple and is achieved by
following the steps below. Perform these steps once the appliance is
standing on all four feet and do not put weight on the plinth.
1. Loosen the two screws on each side of the plinth trim
(four altogether - Fig. 17).
2. Carefully guide the front trim down until the desired height is
achieved. Tighten the screws.
Installing The Handle
Gasket
Washer
Handle Screws
Handle
Содержание HWCB 15 UKBM
Страница 39: ......