background image

28. Do not place objects into any openings.

29. Do not operate if any openings are blocked.

30. Keep unit free from dust, lint, hair and anything else that may reduce the airflow.

31. This vacuum cleaner creates suction, as such, hair, loose clothing, fingers and other

body parts should be kept away from any openings.

32. Do not use the unit to pick up any burning, smoking or flammable objects such as

cigarettes, matches or hot ash.

33. Do not use the unit to pick up flammable or combustible liquids such as gasoline or

use the unit in areas where these liquids are present.

34. Do not use the unit without the filter in place.

IMPORTANT NOTE:

The motor of the unit needs to be switched off for 1 minute after 15

minutes of consecutive use. This is to allow the motor to cool down and to prevent the

motor form overheating, which may cause motor failure. Do not operate this unit for more

than 4 hours (with cool down periods included) at any given time. Also ensure that the

product is cleaned after each use.

Please ensure to clean all the filters as shown in the general cleaning and

maintenance section, after each use

.

The vacuum cleaner is fitted with an automatic cut out switch, which turns the motor off

when it overheats. The main cause of overheating is wet, dirty and blocked filters. Should

the vacuum cleaner stop working due to overheating, please follow the following steps:

1. Turn off the power at the wall socket

2. Unplug the vacuum cleaner

3. Allow the vacuum cleaner to cool down for 60 minutes

4. Clean all the filters as shown in the general maintenance and cleaning section

PARTS DIAGRAM

1. Handle
2. Tube

3. Dust container release button

4. Dust container handle

Содержание HU87-TA-ZA
















Отзывы: