07-04 / 46001719 EN
DELAYED START
With this option you can have the machine start up at a certain time, or you can have the programme
end at a certain time.
You can choose ABSOLUTE TIME MODE or RELATIVE TIME MODE. You must choose one of these
options before you can programme a timed start.
Absolute time mode.- Time is displayed in hours and minutes, as on a clock. If, for example,
you choose 13h.50min., the washing machine will start, or the programme will finish, at that time.
Relative time mode.- Time is displayed as a total, i.e. we can choose that the machine will start,
or that the programme will end, with the addition of time to the clock reading. For example, if the
time on the clock is 10:00 and you want the programme to start at 12:00, add two hours. The
machine will start at 10:00 plus 2:00, i.e. at 12:00.
To choose one of the two options, after accessing the menu, press the key C1 and hold it down until
the time selection screen is displayed. Then press C4 in order to change the selection. Finally, key
in the selection desired.
To programme a delayed start:
1.- Select the programme and the options desired.
2.- Press the key C5 and hold it down until the option you have chosen, i.e. "End of programme
at ... " or "Start of programme at ...", is displayed.
3.- With the option chosen, press C1 or C3 and hold it down until the time is displayed that you
want. The C5 pilot light will go on.
4.- Press H. The machine has now been programmed. The start time selected, or final time
selected, will be displayed.
If you wish to cancel the timed start that you have programmed, press the key C5 and hold it down
for about three seconds. The washing machine will carry out the programme chosen.
To change or cancel a programme
To modify the programme selected once it has star ted, proceed as follows:
a) Press the key H and hold it down until "programme paused", followed by "programme cancelled",
is displayed.
b) Release the key and select the programme you now want. It will be displayed.
c) Press the key H again. The new programme will be displayed.
d) The washing machine will carry out the new programme.
Programme pause
If the programme has begun but you wish to add more clothes:
a) First press H and hold it down until the screen displays programme paused and door secure.
Then, after approximately five minutes, the screen will display: programme paused and door
open.
b) Open the door and add the extra clothes.
c) Close the drum door and press the key H. The programme data initially chosen will be displayed,
and the machine will resume operation where it stopped.
When the programme has been completed, the message "Programme complete, door open" will
be displayed.
"In the interests of safety, turn the programme selector to OFF". Open the lid of the machine,
and then the drum doors, in order to remove clothing.