1
Place the microfiber
pad on the floor
white side facing
up. Place the floor
head onto microfiber
pad making sure the
microfiber padcovers
the entire floorhead.
2
Plug the steamer
into main power
supply and slide t
he On/Off switch
to “On”.
3
The orange light will
illuminate to indicate
power on.
4
The green light will
illuminate to indi-
cate the steamer
is ready to use.
The steamer will
automatically set
to Max steam
(no solution).
Using your machine:
WARNING
Never use the steam floor steamer without a microfiber cleaning
pad attached to the floorhead.Never leave the floor steamer in
one spot for an extended period of time or with a damp or
wet microfiber pad attached as this may damage the floor surface.
!
!
5
Press the button in
the centre of the
control panel to select
steam and solution
setting. The light will
illuminate at the
desired setting:
Max steam
Low steam
Max steam + solution
Low steam + solution
Using the floor steamer
When the steamer is switched on the control panel will automatically set to max steam (no solution).
11
see next page
Wipeout 7_UG for Taiwan_090716.indd 14
9/7/2016 3:45:27 PM
