Hoover HPW4H-ZA, Руководство пользователя

Страница: 8 / 11

MAINTENANCE FAQs
15 14
Insert the nozzle cleaning
tool into the end of lance and
nozzles to remove any dirt
or debris.
WARNING:
Before carrying out any maintenance make sure the machine
is switched off and unplugged.
To remove the lance from trigger
handle, firmly push and twist the
lance anti-clockwise. To unlock,
pull to remove.
To remove nozzles press
the nozzle release button
and pull.
Removing a blockage in the lance and nozzles
Warning:
To reduce the risk of personal injury, unplug the pressure washer before performing
maintenance/troubleshooting checks.
There is an accessory missing
• Check the ‘Machine Overview’ panel on the box to make sure the part is included with your machine.
Why won’t my pressure washer turn on?
• Make sure the on/off switch is set to the ‘I’ position.
• The plug may not be fully pushed into the electrical socket.
• Check the fuse in the plug if this needs replacing, always replace with a 13amp fuse.
• Check if your RCD has been tripped, if it has tripped, reset it.
• The power cord maybe damaged.
Why won’t the water/solution dispense?
• The pump may have stopped, make sure the on/off switch is set to the ‘I’ position
and check the plug fuse.
• The pump may have stopped. This may be because of overheating due to poor water supply.
Check the water flow rate to your water supply.
• Hose may be blocked or kinked, check for leaks in the hose and clear any blockages. Straighten
out the hose to ensure no kinks and check the hose pipe connections to the tap and water inlet.
• There may be an air lock. To remove, unlock the trigger safety lock and squeeze the trigger
to release water before the machine is switched on.
• Check assembly of solution application bottle Go to the ‘Operation’ pages.
Nozzle/accessory may be blocked, clear any blockages and clean nozzle. Go to the
‘Maintenance’ pages.
Why won’t my pressure washer reach operating pressure?
• Hose may be blocked or kinked, check for leaks in the hose and clear any blockages.
Straighten out the hose to ensure no kinks and check the hose pipe connections to the tap
and water inlet.
• Nozzle may be blocked, clear any blockages and clean nozzle. Go to the ‘Maintenance’ page.
• Remove and clean the water inlet filter Go to the ‘Maintenance’ page.
• Check the water flow rate to your water supply.