Hoover HI 148, Инструкция

Страница: 17 / 80

17
Using Inter@ct for the first
time
This machine will operate even if you do not programme the Inter@ct set up.
However, this machine has Départ Différé and Programmation Fin Du Cycle
functions and for these functions to work efficiently Inter@ct must be
programmed. This is a simple operation and special care has been taken
during manufacture to ensure that the user can operate this machine simply
and effectively.
Programming the machine
Inter@ct needs to be programmed so that the correct clock setting, language
and personal requirements are set.
When the machine is turned on and the programme dial is moved away from
the ARRÊT position to a programme selection a Welcome message will appear.
This message is displayed for a short time while the machine recognises which
programme has been selected. When the machine is ready, the programme
details will appear on the display and from here you may now beging
programming the machine.
Example:
Please note that when using the Inter@ct menu you have 30 seconds per
operation to make your selection. Should you run out of time, the display will
return to the start screen, and you simply have to re-enter the Inter@ct menu
and continue with the programming.
HOOVER INTER@CT
WELCOME
11:06
1 WHITE COTTON
90°
HEAVY
1600
RPM
40002960Eng.qxd 12/04/2005 15:11 Page 17