Maint
enanc
e
Maintenance
Changing of the filter and emptying the dust canister
The filter should be cleaned at least twice a year or when required.
Disconnect from mains power supply before performing maintenance duties.
Dust Canister Cleaning
Remove the rubbish in the dust canister frequently
to avoid unnecessary blockages that may lead to failure
of the motor in prolonged occurrences.
Clean the dust canister only after the power cable
of the cleaner has been removed from the power supply.
1. Press the lock button on the dust canister to remove
from the body of the cleaner.
2. Hold the dust canister over the rubbish bin (bag),
press down on the dust release button of the dust
canister, the bottom cover of the dust canister will
automatically open allowing you to clear and empty
the dust canister.
Motor Filter Cleaning
Warning: Ensure the cleaner is not connected to the power supply when
performing any maintenance procedures.
Press the handle of the dust canister to remove the dust
canister from the cleaner. Remove the top cover on
the canister and then remove the filter. The filter can
be cleaned by using a brush under luke warm water.
Alternatively a new filter can be used as a replacement.
Caution:
It is normal that the white central filter in the dust canister
may change color, which will not affect its filtration
performance. If the hose and the central filter are difficult
to clean, it is recommended to use warm water to
clean; ensure the filter is dry before reinstalling into the
cleaner.
Key Points:
Please note: when the dust canister or the filter
cover are not installed correctly, the cleaner will not
function correctly. If the cleaner is not functioning
correctly, check that the dust canister and the filter
cover have been installed correctly.
Caution: Ensure the suction passage is always
unobstructed, otherwise the motor may overheat.
