INSTALLATION GUIDE
AESTHETIC PANELS DIMENSIONS
& INSTALLATION
Page 2
STEP TWO
STEP ONE
TENSION ADJUSTMENT OF THE
DOOR STRING
STEP ONE
Built-in Dishwasher
Install the hook on the aesthetic wooden panel and put
the hook into the slot of the outer door of dishwasher
(see fig 4A)
. After positioning of the panel , fix the
panel onto the outer door by screws and bolts
(fig 4B).
(Fig 3)
The aesthetic panel should be processed in
accordance with the illustrated dimensions
(unit: mm)
The door springs are set at the factory to the proper
tension for the outer door. If aesthetic wooden panel are
installed, you will have to adjust the door spring tension.
Rotate the adjusting screw to drive the adjustor to strain
or relax the steel cable
(see fig 5).
Door spring tension is correct when the door remains
horizontal in the fully opened position yet rises to a close
with the slight lift of a finger.
1)
Take away the four short screws
2)
Pin up the four long screws
Figure 4A
Installation of aesthetic panel
Figure 4B
Installation of aesthetic wooden panel
Figure 5
Tension adjustment of the door spring
