7
NOTE:
The long flexible crevice tool is ideal for cleaning in hard to reach areas, underneath furniture and in your car.
NOTE:
The radiator tool is ideal for cleaning inside and around cabinets, radiators, couches, blinds and more.
NOTE:
The deep cleaning brush is useful to clean in tight spaces without scratching surfaces, and inside your car.
NOTE:
The multi-function tool is designed to easily clean delicate surfaces without scratching and all area’s that are hard
to access or reach the multi-function tool is made up of three key parts.
1.
Crevice tool this is ideal for accessing tight spaces.
2.
Dusting brush is ideal for cleaning surfaces without damaging or scratching.
3.
Furniture Nozzle is ideal for cleaning surfaces like sofa.
ACCESSORY BAG*
Accessories can be stored in the accessory bag.
WALL MOUNT*
For storage and space saving, your appliance can be fixed to your wall using the three screws and screw plugs included.
The product, 2in1 Crevice and Dusting Tool and the 2 in1 Large Dusting and Furniture Tool can be stored on the wall mount
[8]
.
CLEANER MAINTENANCE
Emptying the Dust Container
1.
Press the main body release button and remove the tube.
[9]
2.
Press the dust cup empty button to release the bin flap and empty the contents.
[10]
3.
Close the dust cup flap, you will hear a click when fully locked.
NOTE:
It is recommended to empty the dust cup after each use or when dust is up to the max fill line.
Cleaning the Dust Container and Filter
1.
Press the main body release button and remove the tube.
[9]
2.
Press the dust cup empty button to release the bin flap and empty the contents.
[10]
3.
Close the dust cup flap, you will hear a click when fully locked.
4.
Press the two battery pack release buttons and remove the battery pack from the main body.
[11]
5.
Turn the dust bin in a clockwise direction, align the arrow marks and remove from the main body.
[12]
6.
Turn the mesh filter in a clockwise direction and remove it from the single cyclone separator.
[13]
7.
Turn the single cyclone separator in a clockwise direction, align the arrow marks and remove it from the main
body.
[14]
8.
Press the two exhaust filter release buttons and remove the exhaust filter from the main body.
[15]
9.
Wipe clean the single cyclone with a dry cloth. Wash the exhaust filter, dust cup, mesh filter and single cyclone
separator in lukewarm water
[16]
, leave to dry for 24 hours.
[17]
Ensure all components are fully dry before refitting
to the main body.
NOTE:
do not use hot water or detergents when cleaning the exhaust filter. In the unlikely event of the exhaust filter
becoming damaged, fit a genuine Hoover replacement. Do not use the product without a filter fitted.
IMPORTANT:
for optimum performance, always keep your mesh filter clean. We recommend that the filter should be
washed at least once a week.
Changing and Cleaning the Agitator [18}
IMPORTANT:
always switch off the cleaner and remove the battery pack before changing or cleaning the agitator.
[11]
1.
Detach the agitator release flap.
[18a]
2.
Hold the agitator release flap and pull down to remove the agitator.
[18b]
3.
Replace or clean the agitator. This can only fit in one direction.
[18c}
4.
Close the agitator release
flap.
5.
Refit the battery pack.
Replacing the Batteries
This cleaner is fitted with a rechargeable lithium ion battery pack which is replaceable.
WARNING:
only use approved replacement parts for your cleaner. Using parts not validated by hoover are dangerous and
will invalidate your guarantee.
WARNING:
do not try to open the battery pack and repair it by yourself.
1.
Press the battery pack release buttons and slide to remove.
[11]
.
2.
Replace the old battery pack with the new battery pack.
3.
Dispose of the batteries safely. Used batteries should be taken to a recycling station and not disposed of with
household waste.
* Certain Models Only
