CHANGING THE BELT OR BRUSHES
CLEARING A BLOCKAGE
If your cleaner is not picking up efficiently, the belt or brushes (or both) may need replacing, but first
please make sure you have:
• Emptied the bin
• Cleaned the filters
• Checked for blockages
Turn the cleaner over and remove 2 rear
rollers and 2 retaining screws.
Remove the brush guard.
Hold the brush assembly and stretch the
belt until the brush can be slotted back
into the cleaner housing.
Rotate the brush to ensure free movement
of the belt.
Refit the brush guard with 2 retaining screws
and 2 rear rollers..
1
4
2
3
5
6
Check the cleaning
tools and hose for
blockages.
The hose can be
removed at both ends.
Turn the cleaner
over and rotate the
brushes to identify
any obstructions
including hair.
Check for a blockage in
the hose socket. Use a
flexible rod to remove
any obstruction.
- 7 -
*Certain models only
Remove brush assembly and check for
wear on the belt.
Loop the new belt around the
motor and brush channel.
GB
NOTE:
If the brush gets blocked and stops rotating, switch off the cleaner, remove the battery pack
from the cleaner and clear the blockage. If the brush has hair or thread wrapped around it, use
scissors to clear.
IMPORTANT:
Ensure the cleaner is
switched off, and remove the battery pack
from the cleaner before attempting any
maintenance.
IMPORTANT:
Ensure the cleaner is
switched off, and remove the battery pack
from the cleaner before attempting any
maintenance.
Содержание Evo VE18LIG
Страница 1: ...USER MANUAL...
Страница 10: ...PRINTED IN P R C 48022782...