Hoover DXC 27/1-AUS, Руководство пользователя

Страница: 13 / 20

EN
13
The display’s indicator system allows you to
be constantly informed about the status of
the machine.
2
3
5 4 1 6
3 3
1) DOOR LOCKED INDICATOR LIGHT
l
The indicator light is illuminated when the
door is fully closed.
l
When START/PAUSE is pressed on
the machine with the door closed, the
indicator will flash momentarily and then
illuminate.
l
A special safety device prevents the door
from being opened immediately after the
end of the cycle. Wait for
2 minutes after
the wash cycle has finished and the
DOOR LOCKED light has gone out before
opening the door. At the end of the cycle
turn the programme selector to
OFF .
2) CYCLE DURATION
l
When a programme is selected the
display automatically shows the cycle
duration, which can vary, depending on
the options selected.
l
Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the wash.
l
The appliance calculates the time to the
end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to that
applicable to the size and composition of
the load.
3) BUTTONS INDICATOR LIGHTS
l
These light up when the relevant buttons
are pressed.
l
If an option is selected that is not
compatible with the selected programme
then the light on the button first flashes
and then goes off.
4) SPIN SPEED indicator lights
The indicator lights show the spin speed of
the selected programme that can be
changed or omitted by the relevant button.
5) TEMPERATURE SELECTION indicator
lights
The indicator lights show the washing
temperature of the selected programme
that can be changed (where allowed) by the
relevant button.
6) RAPID LENGTH indicator lights
The indicator lights show the rapid
programmes that can be selected by the
relevant button.
Digital Display
Close the door BEFORE selecting the
START/PAUSE button.
If the door is not properly closed,
the light will continue to flash for
about 7 seconds, after which the
start command will be automatically
delete. In this case, close the door
in the proper way and press the
START/PAUSE button.