Hoover DS22HCB, Инструкция по эксплуатации

Страница: 10 / 12

7
GB
2. Dusting brush is ideal for cleaning surfaces without damaging or scratching.
3. Furniture Nozzle is ideal for cleaning surfaces like sofa.
ACCESSORY BAG*
Accessories can be stored in the accessory bag.
WALL MOUNT*
Hang the wall mount to the wall, using the three screws included in the product
[17]
to hang product, 2in1 crevice &
dusting brush, 2in1 large dusting & crevice and mini turbo nozzle (when included).
CLEANER MAINTENANCE
Emptying the Dust Container
1. Press the handheld release button and remove the tube.
[6]
2. Press the dust cup empty button to release the bin flap and empty the contents. [7]
3. Close the dust cup flap up, you will hear a click when fully locked.
NOTE:
It is recommended to empty the dust cup after each use or when dust is up to the max fill lines.
Cleaning the Dust Container and Filter
1. Press the handheld release button and remove the tube.
[6]
2. Press the dust cup empty button to open the bin flap and empty it.
[7]
3. Push down the battery pack release button and remove the battery pack.
[8A,8B]
4. Turn the dust bin in an clockwise direction, align the arrow marks and remove from cleaner main body.
[9]
5. Clean any excess dust from the mesh filter
[J2]
, hold the mesh firmly with one hand and with the other turn the cover cup
[J3]
in a clockwise direction to remove the mesh filter.
[10]
6. Once the cup cover is removed, pull the HSpin-Core Technology assembly away from the main body.
[11A]
Hold the top
of the motor cover
[J1]
and remove the mesh filter by pulling away.
[11B]
7. Press the two exhaust filter release buttons and then remove the exhaust filter.
[12A, 12B]
8. When cleaning the the filters, wash the mesh filter
[J2]
and exhaust filter
[S]
in luke warm water.
[13A]
Clean the
motor cover preferably with a cloth, but ensure no water has any contact with the bearing end.
[13B]
Please ensure
all parts are completely dry before reassembling.
[14]
9. When reassembling the HSpin-Core Technology, firstly reattach the mesh filter to the motor cover,
[15A]
then align
this assembly with the motor shaft, paying particular attention to the flat surface on the motor shaft.
[15B]
10. Secondly again hold mesh filter and refit cover cup: rotate in an anti-clockwise direction to lock
[16]
. PLEASE
ENSURE YOU DO NOT OVERTIGHTEN AS THIS MAY DAMAGE THE THREAD.
11. Complete reassembly of the handheld unit and then attach it to the wall mount.
[17]
NOTE:
Do not use hot water or detergents when cleaning the exhaust filters. In the unlikely event of the exhaust filters
becoming damaged, fit a genuine Hoover replacement. Do not try use the product without a filter fitted.
IMPORTANT: For optimum performance, always keep your mesh filter clean. We recommend that the filter should be
washed at least once a month.
Changing and Cleaning the Agitator
IMPORTANT: Always switch off the cleaner before changing and cleaning the agitator.
1. Detach the agitator release button flap. It is positioned on the lateral part of the nozzle.
[18]
2. Hold the agitator release flap and pull down to remove the agitator.
[18]
3. Replace with new agitator or clean it. This can only fit in one direction.
4. Re-fit in position the agitator release
flap
. [19]
Replacing the Batteries
This cleaner is fitted with a rechargeable Lithium ion battery pack and it is replaceable.
WARNING: Only use approved replacement parts for your cleaner. Using parts not validated by Hoover are dangerous
and will invalidate your guarantee.
WARNING:
Do not try to open the battery pack and repair it by yourself.
1. Pull down the battery pack release button and the battery pack will be pushed out short distance automatic. [8A]
2. Drag the battery pack slowly from the slot. [8B]
3. Removed the old battery pack and replace with the new battery pack.
4. Dispose of the batteries safely. Used batteries should be taken to a recycling station and not disposed off
with household waste.