4
Cleaner description
Place tools in tool rack as shown.
ON-OFF switch
Depress switch to turn cleaner ON
and OFF.
To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug.
If it still does not fit, contact a
qualified electrician to install the
proper outlet. Do not change the
plug in any way.
Rug and floor nozzle
The combination rug and floor nozzle
has been designed to do an efficient
cleaning job on both carpet and hard
surface floors.
Hard surface floors
Lock brushes to clean bare floors by
sliding indicator toward BARE FLOOR.
Rugs
Release brushes to clean rugs or
carpet by sliding indicator toward RUG.
Cleaning tools
A variety of useful cleaning tools,
made for your cleaner, is shown.
A hard floor tool is available at
additional cost from your Authorized
Hoover Dealer (Depot), a Hoover
Factory Service Center, by writing
to The Hoover Company, North
Canton, Ohio 44720 or through
The Hoover Company online at
www.hoovercompany.com
1-5
2-2
1 . D e l u xe rug and floor nozzle
2 . C o rd
wraps around cleaner
for storage.
3 . L a rge wheels
p rovide easy
towing when cleaner is pulled
over carpet, area rugs and
door sills.
4 . Tool rack
5 . Dusting brush
6 . C r evice tool
7 . Furniture nozzle
8 . C a r rying handle
9 . On-off sw i t ch
1 0 . B ag door lock
1 1 . Extension wands
a re used
with the rug and floor nozzle. If
added length is desired when
using cleaning tools, one or
both wands may be used.
1 2 . H o s e
1 3 . Plastic latch ring
is located
on the extension wands and
hand grip; rotate ring to attach
wands or cleaning tools.
1 4 . Hand grip
2-1
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 3
1 4
The assembled cleaner will look
like the drawing.
This cleaner is intended for household
use.
Operate cleaner only at voltage speci-
fied on data plate on bottom of cleaner.
2. How to use
