4
F
H
G
Connect hose
With hose toward front of cleaner, push
hose connector (F) into opening in bag lid.
To disconnect hose, depress buttons on
hose connector and pull up.
1-11
Attach wands, tools and
nozzle
To attach hose to an extension wand or
tool, turn plastic latch ring on hand grip
until outer slot lines up with inner slot.
1-12
Slide button (G) on wand or tool into slot
on grip. Turn latch ring (H) to lock in
place.
1-13
G
F
I
J
1-5
1-7
With padded section of harness facing
out and down as shown, position washer
(F) over top hole (G) on harness.
Insert screw through washer (F), harness
(G), and spacer (D).
Holding nut (H) in place, tighten screw
with a screwdriver.
Push the two black harness attachment
snaps (I) through the hole (J) on either
side of the harness.
K
M
L
1-8
1-9
1-10
Snap the harness attachment snaps into
the holes in the cleaner body.
Extra
effort may be required to snap into
cleaner body.
Lay cleaner flat. Slide bag collar (K) into
collar bracket (L). Fit sides of bag into
bag compartment.
If the bag lid has come off, align the
hinges (M) with the appropriate slots in
the cleaner as shown and snap in place.
Close lid.
H
1-6
D
F
G
