Hoover 39400235, Инструкция по эксплуатации

Страница: 8 / 11

3
Hoover service:
To ensure the continued safe and efficient
operation of this appliance we recommend that any servicing
or repairs are only carried out by an authorised Hoover service
engineer.
Do not use the appliance to clean animals or people.
Do not
replace the batteries with non-rechargeable batteries.
Do frequently clean the dust cup and filter assembly.
The environment:
This appliance is marked according to the European directive 2011/65/EC on Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The symbol on the product indicates that this product may not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with local environmental
regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product,
please contact your local city office, your household waste disposal service or the shop where you purchased the product.
This product complies with the European Directives 2006/95/EC, 2004/108/EC and 2011/65/EC.
Hoover Limited Pentrebach, Merthyr Tydfil, Mid Glamorgan CF48 4TU
PrEParInG yoUr CLEanEr
PRODUCT COMPONENTS
Main Cleaner
A. Carpet and Floor Nozzle
B. Main Body
C. Handheld Release Button
D. Handle Release Button
E.
On/Off Switch
F. Product Holder
G. Charger
H. Handheld Unit
I. Crevice Tool / Dusting Brush
J. Nozzle Release Button
Handheld Cleaner
K. On/Off Switch
L. Charging Indicator
M. Dust Container Release Button
N. Dust Container
Filter
O. Cloth Filter
* Certain Models Only
1. Unfold the handle from the main body until it locks in place. [1]
2. Line up the nozzle with the main body and firmly push into the main body until the nozzle
locks in place. [2]
3. For first use, charge your cleaner for 24Hrs and completely discharged. after first use the
normal charging time is 12Hrs.
4. The indicator light will blink when charging and remain lit when fully charged. [3]
5. Fix the Product Holder to your wall using the screw and holder provided.
NOTe:
To remove the nozzle, press the nozzle release button and pull away from the main body.
NOTe:
Use only the charger supplied with your cleaner to recharge.
IMPORTANT: When charging the cleaner, the On/Off switch must be OFF.
It is normal for the charger to become warm to touch when charging.
If the operating times reduce after repeated use let the cleaner run until it stops then recharge for 24Hrs,
repeat this for monthly for best results.
Unplug the charger in the event of prolonged absence (holidays etc.).Recharge product again before use
as battery may self discharge over increased periods of storage.