Hoover 39100390, Руководство пользователя

Страница: 7 / 10

- 7 -
If your cleaner is not picking up efficiently, the belt or
brushes (or both) may need replacing, but first make
sure you have:
• Emptied the dust container
• Cleaned filters
• Checked for blockages
remove hood
• Prise off the carpet care control selector.
• Remove hood screws a and B.
• Lift off hood.
remove brush assembly
• Inspect belt for signs of wear.
• To remove, pull brush cleaner assembly upwards
out of cleaner housing. remove belt from motor
spindle then from brush assembly.
replace belt
• Loop the new belt around the motor spindle then
around the brush channel.
Refit brush assembly
• Hold the brush assembly
and stretch the belt until
brush mountings slot
down into the cleaner
housing. rotate the
brush to ensure free
movement of the belt.
Refit hood
• Refit hood, ensuring the
lugs along the front of
hood are located in the
slots along the front edge
of baseplate.
• secure hood, using
screws A and b.
Refit carpet care control
selector
• Ensure the raised face
(T) is towards the front of
the cleaner.
4
5
3
1
2
imPOrTanT: Switch cleaner off and
remove plug from electricity supply
before checking the brushes or remov-
ing hood.
1
2
CHanging BELT Or BrUSHES
This cleaner is unlikely to become blocked, except
by over filling of the dust bag or accidentally picking
up large solid objects. Clearing a blockage is simple.
If cleaning tools were in
use, check cleaning tool
and extension tube first.
next check hose handgrip;
to remove grip ribbed ring
as shown, turn in direction
of arrow and ease apart.
To check the hose, stretch it
to full length and switch on
the cleaner; the suction will
dislodge most obstructions.
If this is unsuccessful,
switch off and unplug the
cleaner. remove the hose
by turning it anti-clockwise
as shown. Detach hose and
remove blockage.
For blockages in cleaner base:
1. Turn the cleaner over
and check that the brushes
are free to rotate.
2. Check for a blockage in
hose socket. Use a piece of
wire or a blunt flexible rod
to remove any obstructions.
CLEaring a BLOCKagE
imPOrTanT: Switch the cleaner off
and remove the plug from the elec-
tricity supply before dismantling
cleaner.
!
- 7 -
* Certain models only
removing a blockage from the
Pet Hair & allergen remover*
Open clip and lift cover to remove
blockage.
b
A