manualshive.com logo in svg

Hoover 1300 SPIN, Инструкция

Поделиться
Скачать
Hoover 1300 SPIN Скачать руководство пользователя страница 17

PAUSE

The programme may be paused at any time during the wash
cycle by holding down the Start Pause button for about two
seconds. When the machine is in the paused mode, the time
remaining for the programme in the WASH PHASES indicator
and option buttons will flash. The door lock indicator light will
remain illuminated for approximately 2 minutes. The door can
be opened when this indicator goes out. To restart the
programme, press the Start Pause button once again.

Cancelling and changing the programme

To cancel the programme the programme selector should be
rotated to the OFF position. 
Select a new programme and start as detailed above.

Door Locked indicator 

The DOOR LOCKED indicator light is illuminated when the
door is fully closed and the machine is ON. 
When Start Pause is pressed on the machine with the door
closed the indicator will flash momentarily and then
illuminate. If the door is not closed the indicator will continue
to flash.
A special safety device prevents the door from being opened
immediately after the end of the cycle. Wait for 2 minutes
after the wash cycle has finished and the Door Locked light has
gone out before opening the door. As a safety measure, check
that there is no water evident in the drum. At the end of the
cycle turn the programme selector to OFF.
If the programme is paused, the door locked indicator will go
out after 2 minutes and the door can be opened. Check there
is no water evident in the drum before opening the door.

Wash Progress

In order to better manage your time, this washing machine
features an indicator light system that keeps you constantly
informed as to the part of the cycle the machine is currently
completing.
Indicator light 

Pre-wash phase

Indicator light 

Wash phase

Indicator light 

Rinse phase

Indicator light 

Final spin phase

Indicator light 

STOP

End of the programme

17

40003119.qxd  12/04/2005  18:10  Page 17

Содержание 1300 SPIN

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды